-
XS Scuba 110º Angle AdapterVendor: XS ScubaInstalls between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing Often used to set up underarm routing of primary regulator hose Chromed brass construction with Viton o-rings Low pressure use only – below...
- $77.98
-
- $77.98
- Unit price
- per
-
XS Scuba X5 Accessory HangerVendor: XS ScubaHang 'em up...mask, snorkel, fins, boots & gloves. Drain, dry and store in one place Removable crossbar to hang mask & snorkel Lays flat for travel by removing crossbar Tough X-beam design Dimensions: 16.25 x 17.75 x 5.25 in (41.2 x 45 x 13.5...
- $28.99
-
- $28.99
- Unit price
- per
-
XS Scuba Octopus HolderVendor: XS ScubaRetains octopus by inserting mouthpiece Split ring or snap hook attachment Helps prevent unwanted freeflow
- $12.99
-
- $12.99
- Unit price
- per
-
Scubapro S-TEK Trim Weight Pocket KitVendor: ScubaproHere’s an easy way to add trim weights to your harness system to improve your at-depth trim position. The kit mounts on a back plate and includes a mounting baton with all necessary mounting hardware and two trim pockets that each hold up to...
- $107.99
-
- $107.99
- Unit price
- per
-
XS Scuba D-Ring Holder (Taco)Vendor: XS Scuba316 grade stainless steel construction
- $6.99
-
- $6.99
- Unit price
- per
-
Scubapro S-Tek Bungee Regulator NecklaceVendor: ScubaproThe regulator necklace is a great way to keep your octo close and always ready for quick deployment. Made of quality bungee, this flexible necklace fits under the mouthpiece clip of any regulator second stage. It’s a must-have accessory for all tech divers.
- $23.99
-
- $23.99
- Unit price
- per
-
XS Scuba 45 Degree Billy RingVendor: XS Scuba316 grade stainless steel construction
- $18.99
-
- $18.99
- Unit price
- per
-
XS Scuba HP ExtenderVendor: XS ScubaThe extender is useful if there is not enough room on the regulator’s first stage for your computer transmitter Chromed brass construction with Viton o-rings High pressure only – maximum 5000 psi Cleaned for use with up to 40% pre-blended Nitrox (1) 7/16”-20 male...
- $22.01
-
- $22.01
- Unit price
- per
-
XS Scuba T Retainer for 2” WebbingVendor: XS Scuba316 grade stainless steel construction
- $5.58
-
- $5.58
- Unit price
- per
-
Scubapro S270 OctopusVendor: ScubaproThe ideal backup breather for your dive system, the S270 Octopus is tough, reliable, and easy to use. Its air-balanced design can be counted on to deliver top-notch breathing performance when you need it most. Lightweight Scubapro S270 casing is made of a fiberglass-reinforced...
- $479.99
-
- $479.99
- Unit price
- per
-
Scubapro S-TEK Single Tank AdapterVendor: ScubaproThe S-Tek Single Tank Adapter is a convenient way to switch from double tank to single tank diving. Made from marine-grade aluminum, the design of this adapter makes it much easier to attach the tank using a single cinch band. It offers more vertical...
- $315.99
-
- $315.99
- Unit price
- per
-
Rental per item Scuba Diving and FreedivingVendor: Diving SportsScuba Diving & Freediving Gear Rental (Per Item) | Vancouver At Diving Sports Canada, we offer high-quality scuba diving gear rental in Vancouver and freediving equipment rentals in British Columbia, designed specifically for cold-water conditions. Our rental equipment is ideal for dive sites across...
- From $10.00
-
- From $10.00
- Unit price
- per
-
XS Scuba Low Pressure Port ExtenderVendor: XS Scuba3/8”-24 female x 3/8”-24 male Extend the placement of LP port away from first stage 16 mm height Brass construction with black chrome finish Viton o-rings where applicable Low pressure use only - below 200 psi
- $16.87
-
- $16.87
- Unit price
- per
-
Scubapro R195 OctopusVendor: ScubaproHigh visibility yellow cover makes it easy to see when it comes time to share air with a buddy in need. Rugged reinforced technopolymer casing is fitted with a large diaphragm for the ultimate in breathing sensitivity, regardless of position in the water....
- $399.99
-
- $399.99
- Unit price
- per
There are 1001 Page(s) and article(s) for 'Scuba Diving Accessories'
-
XS Scuba 110º Angle Adapter
Installs between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing...View product -
XS Scuba X5 Accessory Hanger
Hang 'em up...mask, snorkel, fins, boots & gloves. Drain, dry and store in one place Removable crossbar to hang mask &...View product -
XS Scuba Octopus Holder
Retains octopus by inserting mouthpiece Split ring or snap hook attachment Helps prevent unwanted freeflowView product -
Scubapro S-TEK Trim Weight Pocket Kit
Here’s an easy way to add trim weights to your harness system to improve your at-depth trim position. The kit mounts...View product -
Scubapro S-Tek Bungee Regulator Necklace
The regulator necklace is a great way to keep your octo close and always ready for quick deployment. Made of quality...View product -
XS Scuba HP Extender
The extender is useful if there is not enough room on the regulator’s first stage for your computer transmitter Chromed brass...View product -
Scubapro S270 Octopus
The ideal backup breather for your dive system, the S270 Octopus is tough, reliable, and easy to use. Its air-balanced design...View product -
Scubapro S-TEK Single Tank Adapter
The S-Tek Single Tank Adapter is a convenient way to switch from double tank to single tank diving. Made from marine-grade...View product -
Rental per item Scuba Diving and Freediving
Scuba Diving & Freediving Gear Rental (Per Item) | Vancouver At Diving Sports Canada, we offer high-quality scuba diving gear rental...View product -
XS Scuba Low Pressure Port Extender
3/8”-24 female x 3/8”-24 male Extend the placement of LP port away from first stage 16 mm height Brass construction with...View product -
Scubapro R195 Octopus
High visibility yellow cover makes it easy to see when it comes time to share air with a buddy in...View product -
XS Scuba Mini Retractor
Mini retractor size Attach to diver with Delrin/stainless steel snap hook Attach to gear with stainless steel split ring Recommended for...View product -
Gear Aid Sea Gold Anti-Fog Gel
When scuba diving or snorkeling, there’s nothing more annoying than a fogged-up dive mask. So why mess around with just any...View product -
XS Scuba Tank Banger
Get your buddy’s attention underwater Fits 6.9 to 8.0 in (175 to 203 mm) diameter cylinders Install around bottom of cylinder...View product -
XS Scuba Leeward 6 Regulator Bag
Protect your regulator and gauges with the padded Leeward 6 regulator bag. An internal zippered pocket is the perfect place to...View product -
XS Scuba Thermo Modular PRO
Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet Modular access plug included 3/4”-14 NPSM standard inlet...View product -
Scubapro MK11 EVO/R105 Dive Regulator System
The new MK11 EVO/R105 is a simple, rugged and reliable air delivery system. The MK11 EVO is a compact balanced diaphragm...View product -
Scubapro MK11 EVO/S270 Dive Regulator System
For divers seeking reliable performance in an uncomplicated air delivery system, the MK11 EVO / S270 is easy to use, compact...View product -
XS Scuba Rubber Boot for Mini Tech SPG
Mini Tech Gauges have grown in popularity, but there has never been a good way to protect them from the bumps...View product -
Octopus Freediving Safety Stopper
Strong and reliable, our new OCTOPUS safety stopper enhances your safety as it efficiently prevents your lanyard from getting stuck. The almost-flat upper...View product -
Scubapro Quick Octopus Clip Magnetic
Keep your octopus safe and secure and always accessible with a magnetic OCTOPUS CLIP. Simply attach one end of the OCTOPUS...View product -
Scubapro MK25 EVO/S620 Ti White Dive Regulator System
The special edition white S620Ti regulator touts a long list of features guaranteed to enhance your underwater experience, offering improved work...View product -
Innovative Scuba Concepts Tank Cam Band with Metal Scuba Flag Buckle
Various tank cam bands with stainless steel or plastic buckles.View product -
Scuba Force Tec SMB Orange
A plus for your diving safety and not only for TECHIES. High quality seams (ultrasonically welded - sewn on edge) combined...View product -
ScubaPro Mask Mount for GoPro Cameras
Enjoy your dive without worrying about losing your GoPro with this convenient mask mount. Specially designed for the world's most popular...View product -
XS Scuba First Stage Quick Disconnect
First Stage Quick Disconnect • Quick and convenient way to change hose lengths between dives Installs between first stage and regulator...View product -
XS Scuba Cave Marker Holder
The Highland Cave Marker Holder is a smart way to safely secure and organize your cave markers. Simply pull the tubing...View product -
Scuba Force Tec Deluxe SMB Orange
The DELUXE SMB has both: a non-locking inflator connection as well as a duck valve. Thus, the SMB can be inflated...View product -
XS Scuba Rubber Hoses Low Pressure Black
Not all rubber hoses are created equally. Go with the quality difference and choose XS Scuba rubber hoses. Our hoses are...View product -
Scubapro S-TEK Pro Stainless Steel Harness
SCUBAPRO’s new S-Tek Pro Harness combines premium-plus materials and construction with purist technology and features in a revolutionary designed Back Plate...View product -
XS Scuba Smart Marker Buoy (SMB)
With so many SMBs in the marketplace, it is easy to become confused. Some are “bare bones” proving difficult to use,...View product -
XS Scuba Stage Bottle Strap Kits
Includes: 2 ea. 4 in (100 mm) jumbo stainless steel bolt snaps 1 in (50 mm) wide, adjustable length, nylon webbing...View product -
Scubapro Marker Buoy SMB 210D Nylon Orange 4.5 ft
This professional grade SMB (surface marker buoy) features a double inflation system with a one way integrated valve, making it easy...View product -
Scubapro MK2 EVO/S270 Dive Regulator System
Recreational divers looking for solid performance in a regulator system and ready to step up from their entry-level systems are going...View product -
XS Scuba SS Weight Keeper with D-ring
Keep your weights positioned where needed, with an added attachment point for clips 304 stainless steel 2 in (50 mm) slots,...View product -
Innovative Scuba Concepts Deluxe 6-Foot Cordura Signal Tube
Comes with oral inflator, regulator inflator opening, dump valve, safety whistle and vinyl light stick holder! This unique cordura signal tube...View product -
XS Scuba Rubber Hoses High Pressure
Not all rubber hoses are created equally. Go with the quality difference and choose XS Scuba rubber hoses. Our hoses are...View product -
Scubapro R105 Octopus
The R105 Octopus offers dependable breathing performance in a classic downstream design with a dive/pre-dive VIVA switch and reversible hose attachment....View product -
Scuba Force 90° Adapter LP 2nd Stage
Installs between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing...View product -
Aqualung ABS Octopus
Aqualung is synonymous with the modern scuba regulator. Over 70 years of innovation have gone into making scuba regulators that are...View product -
XS Scuba Finger Spools
Available in three sizes Spools are injection-molded with glass-filled nylon #24 hi-viz yellow nylon 16 strand line (breaking strength 120 lbs/55...View product -
Scubapro DIN to Yoke Adapter
If you use DIN valve cylinders and are planning a destination dive trip you may not be able to mount your...View product -
Scubapro MK25 EVO/S600 Dive Regulator System
The MK25 EVO and S600 second stage regulator from Scubapro is a top-performing diving system, offering ultra-high airflow and unbeatable performance...View product -
XS Scuba 90º Right Angle Adapter
Installs between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing...View product -
Freediving vs Scuba Diving: What Works, What Doesn’t (Cold Water)
Can you use freediving gear for scuba diving in cold water? This guide breaks down what works, what doesn’t, and what...View article
