-
Vendor: XS ScubaLightweight and flexible low pressure hoses Multi-layer construction Excellent resistance to abrasion Kink-resistant design Approved for use for use with up to 40% oxygen Individually tested at the factory EN250 approved Individually marked with the Miflex logo and date code Manufactured in Italy Inner...
- $67.49
-
- $67.49
- Unit price
- per
-
Vendor: XS ScubaLightweight and flexible low pressure hoses Multi-layer construction Excellent resistance to abrasion Kink-resistant design Approved for use for use with up to 40% oxygen Individually tested at the factory EN250 approved Individually marked with the Miflex logo and date code Manufactured in Italy Inner...
- $67.49
-
- $67.49
- Unit price
- per
-
Vendor: XS ScubaHigh quality injection-molded construction. Self-draining and durable Round rim design for twins and boat racks
- $33.75
-
- $33.75
- Unit price
- per
-
Vendor: XS Scuba10 Piece Pack Highland Cave Markers are strong and highly visible. They are a good value because they are of excellent quality at an affordable price. You can easily write on them with a permanent marker All points have been rounded off for ease...
- $19.81
-
- $19.81
- Unit price
- per
-
Vendor: XS Scuba10 Piece Pack Highland Cave Markers are strong and highly visible. They are a good value because they are of excellent quality at an affordable price. You can easily write on them with a permanent marker All points have been rounded off for ease...
- $19.81
-
- $19.81
- Unit price
- per
-
Vendor: XS ScubaStainless steel construction 6 wrenches: 1/2”, 9/16”, 5/8”, 11/16”, 13/16”, 15mm 3 screwdrivers: 1/8”, 1/4” Flat, #1 Phillips 2 Allen keys: 3/16”, 5/32” 1 scratch awl Dimensions: 4.5 x 1.0 x 1.0 in (114 x 25 x 25 mm)
- $33.75
-
- $33.75
- Unit price
- per
-
Vendor: XS ScubaNitrox Ready Up to 40% Corrosion Resistant Aluminum Alloy Cylinder Convertible K Valve, Yoke or DIN Easy Grip Rubber Hand-Wheel Meets Certifications DOT & TC
- $392.99
-
- $392.99
- Unit price
- per
-
Vendor: XS ScubaInstalls between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing Often used to set up underarm routing of primary regulator hose Chromed brass construction with Viton O-rings Low pressure use only – below...
- $52.99
-
- $52.99
- Unit price
- per
-
Vendor: XS ScubaEasy to adjust from 150 to 250 psi Factory preset at 200 psi (+/- 10 psi) All stainless steel construction with Viton O-rings Machined Delrin cap protects the adjustment point Compact relief valve releases pressure in the event of an over pressurization of the...
- $61.40
-
- $61.40
- Unit price
- per
-
Vendor: XS ScubaAre you tired of feeling like your hose is trying to push your regulator out of your mouth? Get the new Miflex DS (Dual Swivel) hose and take comfort and flexibility to a new level. The 60º swivel ball joint on the second stage...
- $132.60
-
- $132.60
- Unit price
- per
-
Vendor: XS ScubaAre you tired of feeling like your hose is trying to push your regulator out of your mouth? Get the new Miflex DS (Dual Swivel) hose and take comfort and flexibility to a new level. The 60º swivel ball joint on the second stage...
- $132.60
-
- $132.60
- Unit price
- per
-
Vendor: XS ScubaAre you tired of feeling like your hose is trying to push your regulator out of your mouth? Get the new Miflex DS (Dual Swivel) hose and take comfort and flexibility to a new level. The 60º swivel ball joint on the second stage...
- $132.60
-
- $132.60
- Unit price
- per
-
Vendor: XS ScubaXS Scuba Faber High Pressure Steel Tanks are of the highest quality steel scuba cylinders available. They are manufactured using a deep draw process with chrome molybdenum steel and an exclusive phosphatized-cleaned internal surface. XS Scuba Faber High Pressure Steel Tanks and Pro Valves...
- $704.95
-
- $704.95
- Unit price
- per
-
Vendor: XS ScubaConnects right & left modular valves together to build a Thermo Isolation Manifold Center to center 215 mm (8.46 in) Double barrel o-ring seal Clean for pre-blended Nitrox up to 40% oxygen
- $166.99
-
- $166.99
- Unit price
- per
-
Vendor: XS ScubaSolid, one-piece, anodized aluminum handle Spool lock can mount on either end for left or right-handed use Spool is machined from Delrin, will not warp or absorb water like nylon spools Includes SS shackle bolt snap #24 orange line, 8 strand, with breaking strength...
- From $211.28
-
- From $211.28
- Unit price
- per
-
Vendor: XS ScubaFlared edges are easier to grip and keep fingers out of the way Large center hole fits gloved thumb 304 stainless steel with anodized surface #24 orange line, 8 strand, with breaking strength of 168 lbs (76 kg) 4” stainless steel double-ender bolt snap...
- From $67.49
-
- From $67.49
- Unit price
- per
-
Vendor: XS ScubaConverting your regulator/hoses to 1/4” NPT has many practical application in diving as well as your garage or shop Used with surface supplied umbilicals, switch blocks, comm gear and pneumatic tools Viton o-rings where applicable 1/4” NPT male to 3/8”-24 UNF male Chromed brass...
- $13.94
-
- $13.94
- Unit price
- per
-
Vendor: XS ScubaConverting your regulator/hoses to 1/4” NPT has many practical application in diving as well as your garage or shop Used with surface supplied umbilicals, switch blocks, comm gear and pneumatic tools Viton o-rings where applicable 1/4” NPT male to 3/8”-24 UNF female Stainless steel...
- $33.75
-
- $33.75
- Unit price
- per
-
Vendor: XS ScubaReroute, or increase, the number of low pressure hoses coming off your first stage Chromed brass construction with Viton o-rings Low pressure only – below 200 psi (1) 3/8”-24 male inlet to (2) 3/8”-24 female outlets
- $41.08
-
- $41.08
- Unit price
- per
-
Vendor: XS ScubaConvert any standard regulator hose to a “Drysuit Style” QD hose Installs to the second stage end of a regulator hose Chromed brass construction with Viton o-rings Low pressure use only - below 200 psi Compatible with: Swedish CEJN couplers as found on many...
- $33.75
-
- $33.75
- Unit price
- per