-
Vendor: XS ScubaOne end has a Delrin/stainless steel wire gate snap hook. The other end has a stainless steel split ring and cord with lock These coil lanyards are reinforced with internal stainless steel cable for maximum strength Just disengage the side release clip to extend...
- $43.99
-
- $43.99
- Unit price
- per
-
Vendor: XS ScubaStandard size retractor Lock the cable open, closed or anywhere in the middle Attach to gear with stainless steel split ring or nylon lanyard Attach to diver with Delrin snap hook attachment Dimensions 2.6 x 2.2 x 0.8 in : 66 x 56 x...
- $48.42
-
- $48.42
- Unit price
- per
-
Vendor: XS ScubaInstalls between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing Often used to set up underarm routing of primary regulator hose Chromed brass construction with Viton o-rings Low pressure use only – below...
- $43.99
-
- $43.99
- Unit price
- per
-
Vendor: XS ScubaRetains two standard diameter (11-13 mm) low or high pressure hoses Two-way swivel Delrin and stainless steel construction
- $11.00
-
- $11.00
- Unit price
- per
-
Vendor: XS ScubaLightweight and flexible low pressure hoses Multi-layer construction Excellent resistance to abrasion Kink-resistant design Approved for use for use with up to 40% oxygen Individually tested at the factory EN250 approved Individually marked with the Miflex logo and date code Manufactured in Italy Inner...
- From $67.49
-
- From $67.49
- Unit price
- per
-
Vendor: XS ScubaHang it upside-down by the feet. Excellent drainage & drying Swivel attachment hook Tough X-beam design Dimensions: 12 x 7 x 8 in (30.5 x 18 x 20.5 cm) Weight: 17 oz. (482 g)
- $17.97
-
- $17.97
- Unit price
- per
-
Vendor: XS ScubaWhile they serve many purposes, Spring Hooks are a strong, secure way to attach accessories to your harness or BC. 316 grade stainless steel construction
- $24.36
-
- $24.36
- Unit price
- per
-
Vendor: XS Scuba5 pack Split rings, like tie wraps, are a diver’s best friend. Use them to attach items to your D-rings, such as car keys, lanyards and retractors. Keep some in your save-a-dive kit. They’re inexpensive but oh so useful. 25 mm outer diameter 304...
- $6.60
-
- $6.60
- Unit price
- per
-
Vendor: XS ScubaNo need to sell bungee cord by the foot. This small 25 ft (7.6 m) roll is consumer friendly. With so many varied uses, every diver should keep a roll on hand. The 5/32 in (4 mm) diameter is the most popular size. Common...
- $18.34
-
- $18.34
- Unit price
- per
-
Vendor: XS ScubaThree combination wrench set 1/2” by 7/16”, 5/8” by 1/2” and 11/16” by 9/16” Fit for most common regulator hoses Stainless steel construction 6 in (16.5 cm) wrench length Perfect for any diver’s save-a-dive kit
- $37.99
-
- $37.99
- Unit price
- per
-
Vendor: XS Scuba2 Pack Sidemount divers, technical divers, and free divers, this product is for you! Highland Weight Plates are a quick and easy way to add blocks of lead to a 2 in (50mm) wide piece of webbing such as a harness or weight belt....
- $30.99
-
- $30.99
- Unit price
- per
-
Vendor: XS ScubaDesigned to add up to 5 lbs (2.25 kg) of bagged shot or hard weight Attaches by sliding over the end of 2 in (50 mm) webbing Easy addition to tank band, weight belt or other harness systems Perfect for adjusting your trim in...
- $19.83
-
- $19.83
- Unit price
- per
-
Vendor: XS ScubaIf you plan to use Nitrox (up to EAN40) or if you need to switch between yoke and DIN regulators, then the Thermo PRO valve is the valve for you. It is pre-cleaned and ready for any adventure. Standard yoke outlet with spin-out DIN...
- $122.99
-
- $122.99
- Unit price
- per
-
Vendor: XS ScubaConverting your regulator/hoses to 1/4” NPT has many practical application in diving as well as your garage or shop Used with surface supplied umbilicals, switch blocks, comm gear and pneumatic tools Viton o-rings where applicable 1/4” NPT female to 3/8”-24 UNF male Chromed brass...
- $18.56
-
- $18.56
- Unit price
- per
-
Vendor: XS ScubaAttach to the second stage end of one low pressure regulator hose Allows the attachment of two low pressure regulator hoses (first stage ends) One 9/16”-18 male inlet to two 3/8”-24 female outlets Chromed brass construction with Viton o-ring Low pressure only - below...
- $54.99
-
- $54.99
- Unit price
- per
-
Vendor: XS ScubaDeveloped specifically for technical and professional divers, the XT-Tech hoses have a smooth outer layer and reduced flexibility compared to the Xtreme hoses. The smooth outer surface prevents abrasion around the neck Less flexibility and negative buoyancy allow the longer hoses to stay in...
- From $67.49
-
- From $67.49
- Unit price
- per
-
Vendor: XS ScubaLightweight and flexible low pressure hoses Multi-layer construction Excellent resistance to abrasion Kink-resistant design Approved for use for use with up to 40% oxygen Individually tested at the factory EN250 approved Individually marked with the Miflex logo and date code Manufactured in Italy Inner...
- From $62.99
-
- From $62.99
- Unit price
- per
-
Vendor: XS Scuba316 grade stainless steel construction
- $5.58
-
- $5.58
- Unit price
- per
-
Vendor: XS Scuba316 grade stainless steel construction
- $4.25
-
- $4.25
- Unit price
- per
-
Vendor: XS ScubaHigh quality injection-molded construction. Self-draining and durable Octagon rim design to prevent side rolling
- From $21.25
-
- From $21.25
- Unit price
- per